Australian Distributors Needed Contact Us For More Info

  • UK's leading downdraught bench
  • No direct competition
  • Easily specified with pre-sales support available
  • No experience necessary
  • Assistance with lead generation
  • Email scook@airbench.com for more information.

AirBench EX

Print
PDF

Construction Detail

AirBench EX range is a standard duty downdraft bench, constructed from robust anodised aluminium frame sections and plastic coated leathercloth grey steel outer panels, with galvanised steel inners. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is via removal of the front cover. Filter changes can be accomplished in minutes.

AirBench EX models have a knee-space built in to provide comfortable seated working conditions. All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench EX is suited to both light industrial applications, and office or laboratory applications where a high grade finish is required – for example laboratories, testing houses, electronics etc. It is suitable for surface loads up to 50kg. Performance and pricing is identical to comparable FP models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.
Construction Specifications
  
  • Frame: Robust anodised aluminium profile
  • Panels: Leathercloth effect plastic coated steel
  • Surface: Perforated 3mm thick steel; powder coated after fabrication
  • Filter housing: Positively clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning; via removal of front cover for replacement
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.
Dimensions and Models
Width
Depth
Height
Model No
660 650 840 EX066584
1260 650 840 EX126584
1860 650 840 EX186584
1260 950 840 EX129584
1860 950 840 EX189584
Accessories

We supply a full range of accessories including:

- Castors
- Remote fans and ducting
- Electronic speed control
- Enclosures
- Spare filters and alternative filter sets
- Hours run meters
- Audible low flow alarm

 

Applications

AirBench EX is available with the following standard filter configurations:

A Non sparking dusts
H Fine non sparking dusts
B Very fine non sparking dusts
L HEPA filtration
E Low volume fume
C Light sparks

Use the menu on the right for further information about specific filter configurations.

Applications

Related Downloads


Request Information

Why Downdraught? A paper by WorkPoint

Why use a downdraught bench to solve your dust or fume problem?

Read more...

AirBench FN A New Model From WorkPoint

Read more...