AirBench FP-A - Dust, No Sparks


AirBench FP-A is specified for extraction of non-sparking dusts with a relatively large particle size in the range of 5-10 microns.

Sample applications include aluminium fettling and grinding, wood working including MDF, trimming and fettling of plastics, atmospheric dusts, flour or similar powder weighing and processing, GRP trimming and finishing, dry stone cutting, airline cleaning of electrical components and PCs after use, tool cleaning.

Aluminium dust extraction   Wood dust extraction   Sanding dust extraction   Workshop dust extraction
Click images to expand

AirBench FP is a heavy duty downdraft bench, and is constructed from fully welded 2mm steel panels, powder coated grey. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is also via removal of the surface. Filter changes can be accomplished in minutes.

All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench FP is robust, and is designed for continuous, production level duty with surface loads up to 150kg. Performance and pricing is identical to comparable EX and FN models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.		 AirBench FP - Heavy Duty Downdraught Bench

Dimensions and Models FP-A

Width Depth Height Model No
  670 660 840 FP066784A
1270 660 840 FP126784A
1870 660 840 FP186784A
1270 960 840 FP129784A
1870 960 840 FP189784A

Construction Specifications FP Models

  • Body: Welded, formed 2mm mild steel panels; powder coated grey after fabrication.
  • Surface: Perforated 3mm mild steel; powder coated grey after fabrication
  • Filter housing: Positively clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning or replacement.
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.

Main Filter EU4/100

  • Type: EU4/100
  • Description: 100mm deep V-section pleated panel
  • Construction: Galvanised steel frame. Fully bonded media.
  • Grade: EU4 (approx 95% effective at 5 microns)
  • Estimated life: 6-12 months dependant on level of use.