AirBench FP-L - HEPA Filters


AirBench FP-L is specified for extraction of very fine dusts in high grade environments. This range is provided with HEPA H12 grade filters and is designed for demanding applications including installation in cleanrooms and laboratories, optical, or clean packing area applications.

To support these higher grade applications, AirBench can be supplied with a stainless steel surface. A prefilter is provided to protect the fine HEPA filter; higher grades of HEPA filtration are available.

Aluminium dust extraction   Wood dust extraction   Sanding dust extraction   Workshop dust extraction
Click images to expand

AirBench FP is a heavy duty downdraft bench, and is constructed from fully welded 2mm steel panels, powder coated grey. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is also via removal of the surface. Filter changes can be accomplished in minutes.

All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench FP is robust, and is designed for continuous, production level duty with surface loads up to 150kg. Performance and pricing is identical to comparable EX and FN models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.		 AirBench FP - Heavy Duty Downdraught Bench

Applications Select to view available models

Request Information

Sorry, we've had to temporarily disable our on-line form because someone is interfering with it. You can request information by emailing us at:

sales@airbench.com 

Related Downloads


Dimensions and Models FP-L

Width Depth Height Model No
  670 660 840 FP066784L
1270 660 840 FP126784L
1870 660 840 FP186784L
1270 960 840 FP129784L
1870 960 840 FP189784L

Construction Specifications FP Models

  • Body: Welded, formed 2mm mild steel panels; powder coated grey after fabrication.
  • Surface: Perforated 3mm mild steel; powder coated grey after fabrication
  • Filter housing: Positively clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning or replacement.
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.

Prefilter EU4-50

  • Type: EU4/50
  • Description: 50mm deep V-section pleated panel
  • Construction: Galvanised steel frame. Fully bonded media.
  • Grade: EU4 (approx 95% effective at 5 microns)
  • Estimated life: 6-12 months dependant on level of use.

Main Filter H12 HEPA

  • Type: H12 HEPA
  • Description: 80mm deep fine paper pleated panel
  • Construction: Galvanised steel frame. Fully bonded media.
  • Grade: H12 (100% effective at 0.1 micron)
  • Estimated life: 6-12 months dependant on level of use. 
  • Note: Wooden frame available for furnace disposal.