AirBench EX-C - Dust With Some Sparks


AirBench EX-C is specified for extraction of dusts from applications which generate small quantities of sparks. Sample applications include sanding, grinding, deburring or dressing of welds. For production-grade applications with higher volume sparking, see our FPW or FPT models.

EX-C uses 3-stage filtration including ultra-low-cost disposable pre-filters to reduce overall running cost and unique flame retardant final filters.

Steel dust extraction   Weld fume extraction   Fettling dust extraction   Turning dust extraction
Click images to expand

AirBench EX models are standard duty downdraft benches, constructed from robust anodised aluminium frame sections and plastic coated leathercloth grey steel outer panels, with galvanised steel inners. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is via removal of the front cover. Filter changes can be accomplished in minutes.

 AirBench EX - Standard Duty Downdraught Bench
AirBench EX has a knee-space built for occasional seated working. All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench EX is suited to both light industrial applications, and office or laboratory applications where a high grade finish is required – for example laboratories, testing houses, electronics etc. It is suitable for surface loads up to 50kg. Performance and pricing is identical to comparable FP models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.

Applications Select to view available models

Request Information

Sorry, we've had to temporarily disable our on-line form because someone is interfering with it. You can request information by emailing us at:

sales@airbench.com 

Related Downloads


Dimensions and Models EX-C

Width Depth Height Model No
660 650 840 EX066584C
1260 650 840 EX126584C
1860 650 840 EX186584C
1260 950 840 EX129584C
1860 950 840 EX189584C

Construction Specifications EX Models

  • Frame: Robust anodised aluminium profile
  • Panels: Leathercloth effect plastic coated steel
  • Surface: Perforated 3mm thick steel; powder coated after fabrication
  • Filter housing: Spring clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning; via removal of front cover for replacement
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.

Spark Filter Labyrinth

  • Type: Labyrinth
  • Description: 50mm deep labyrinth spark arrestor
  • Construction: Aluminium frame.
  • Action: Multiple direction changes to arrest large sparks.
  • Estimated life: Generally no requirement to replace.

Spark Filter Media Pad

  • Type: Media pad
  • Description: Disposable media spark filter
  • Construction: Woven mesh.
  • Grade: EU3
  • Estimated life: 1-2 months dependant on level of use.

Main Filter F5/50 Flame Retardant

  • Type: Flame Retardant F5/50
  • Description: 50mm deep V-section pleated panel.
  • Construction: Galvanised steel frame. Fully bonded media.
  • Grade: F5 (>95% effective at 5 microns)
  • Estimated life: 6-12 months dependant on level of use.