AirBench FP-E

AirBench FP-E is specified for extraction of organic and non-organic fume in relatively low volumes and at non-hazardous levels. Sample applications include adhesives, solvents, conformal coatings, airbrushing, cleaning fluids, and spraypainting.

Certain substances cannot be filtered by standard grade carbon filtration; see our carbon effectiveness guide here. For these applications, we recommend our 'R' configuration - use the menu on the left to find out more.

Construction Detail
  
AirBench FP is a heavy duty downdraft bench, and is constructed from fully welded 2mm steel panels, powder coated grey. The surface is constructed from 3mm thick perforated steel, powder coated after fabrication with a smooth finish.

Filters are positively clamped against soft rubber seals; filters can be quickly accessed via the top for cleaning. Replacement is also via removal of the surface. Filter changes can be accomplished in minutes.

All units are supplied with an integral 240v fanset with IP56 motor enclosure; on/off switch (optional speed control); 3m mains lead; and fused plug. A precision filter pressure loss gauge is fitted as standard on all units to allow real-time monitoring of filter condition.

AirBench FP is robust, and is designed for continuous, production level duty with surface loads up to 150kg. Performance and pricing is identical to comparable EX models.

Specifications may vary; contact us to discuss the correct model and filter selection for your application.		 AirBench FP - Heavy Duty Downdraught Bench
Construction Specifications
  • Body: Welded, formed 2mm mild steel panels; powder coated grey after fabrication.
  • Surface: Perforated 3mm mild steel; powder coated grey after fabrication
  • Filter housing: Positively clamped against purpose made soft rubber seals
  • Filter access: Via removal of top surface for cleaning or replacement.
  • Power supply requirements: 240V single phase as standard. 170w - 1100w dependant on model. 110V version available.
  • Mains connection: 3m mains lead supplied as standard
  • Filter Monitoring: Precision differential pressure gauge fitted as standard.
Dimensions and Models
Width
Depth
Height
Model No
  670 660 840 FP066784E
1270 660 840 FP126784E
1870 660 840 FP186784E
1270 960 840 FP129784E
1870 960 840 FP189784E
Pre-filter
Type: EU4/50
Description: 50mm deep V-section pleated panel
Construction: Galvanised steel frame. Fully bonded media.
Grade: EU4 (approx 95% effective at 5 microns)
Estimated life: 6-12 months dependant on level of use.
Main filter
Type: Thin carbon panel
Description: 25mm compact panel
Construction: Galvanised steel frame. Fully bonded and compacted media.
Grade: 207C carbon as standard
Estimated life: 6-12 months dependant on level of use. 

Applications

Related Downloads


Request Information

Why Downdraught? A paper by WorkPoint

Why use a downdraught bench to solve your dust or fume problem?

Read more...

AirBench FN A New Model From WorkPoint

Read more...