Plastic fabrication processes such as CNC routing, cutting and sanding can generate fine dust that becomes airborne during production. Effective dust extraction systems help capture these particles at source and reduce their release into the surrounding workspace.

© AirBench
The extraction requirements for plastic fabrication depend on the particle characteristics generated by the process including size, density and the proportion of fine dust relative to larger chips and swarf. A plastic dust extractor should be selected according to the material being processed, the machining or finishing operation and the volume of dust generated.
Polymer composition, fillers, pigments and other additives can influence the properties and potential hazards of process-generated dust. Material safety data sheets and a suitable COSHH assessment can help identify relevant hazards and determine the controls required for the specific material and operation.
CNC routing and machining can generate a mixture of larger chips and finer airborne particles. The distribution depends on factors such as tooling geometry, cutting conditions and the material being processed.
Sanding and abrasive finishing can produce a different dust profile, with fine particles released across the contact area between the abrasive and workpiece. These differences influence the required capture arrangement.
Dust generated close to a cutting tool may require machine-integrated extraction or an enclosure, while manual sanding across a workbench may be better suited to a larger capture area. Where several processes share a workshop, the extraction design should account for their individual dust loads and operating patterns.
The health risks associated with airborne plastic particles depend on the material’s composition, particle characteristics and conditions of exposure. Dust generated during cutting, routing and sanding should also be distinguished from fumes produced when plastics are heated, as these may present different hazards.
A COSHH assessment should consider the specific material and process, how exposure occurs and which control measures are required. Local exhaust ventilation (LEV) can help control airborne contaminants at source, but the system must be suitable for the hazard and operating conditions.
Effective local exhaust ventilation depends on capturing contaminants before they disperse into the surrounding air. The extraction inlet or capture surface must be positioned in relation to the dust source, taking account of the direction and momentum of the airborne particles.
Downdraught extraction draws contaminants towards a perforated work surface, making it worth considering for suitable manual operations carried out on a bench. Cross-draught systems draw air horizontally across a working area towards an extracted face, which can be useful where the workpiece or dust-generating activity extends across a larger area. The appropriate arrangement depends on the process, workpiece dimensions and operator position.
System performance depends on more than the nominal airflow rate: volume flow rate, capture or face velocity, and airflow distribution help determine whether contaminants are effectively captured. Static pressure and filter resistance also affect performance, particularly as filters accumulate dust.
Capture performance depends on airflow reaching the point of generation at a sufficient rate. Volume flow rate, capture or face velocity, and airflow distribution are relevant when assessing whether a system can control the contaminant effectively. Static pressure and filter resistance also affect performance, particularly as filters accumulate dust.
For more complex installations, dust extraction systems must be designed to maintain suitable airflow across the extraction points in use. Where multiple machines share a system, consider which are likely to operate simultaneously and whether dampers, controls or airflow indicators are needed to maintain and monitor extraction performance.
Routine inspection should cover filter condition, collection areas, airflow indicators and changes in extraction performance. Filter loading can increase system resistance and reduce airflow, so a system may become less effective even when the fan remains operational.
Settled dust can become airborne again when disturbed, so HSE recommends suitable vacuuming or damp cleaning methods, rather than using compressed air, which can push settled dust back into the workplace atmosphere.
LEV systems must also undergo regular thorough examination and testing, as required by law.
For manual plastic fabrication carried out at a fixed workstation, an AirBench downdraught bench may be suitable where the dust-generating work can be positioned over the extraction surface. Available configurations cover general, fine and very fine dust applications, subject to the requirements of the process.
Where workpieces are too large for a bench or dust is generated across a wider working area, VertEx Cross-Draught Systems and Booths may provide a more appropriate arrangement. These systems draw contaminated air horizontally through an extracted face, making them worth considering for applications that require a larger capture area.
Depending on the material and particle characteristics, the potential for combustible dust should also be assessed. Where relevant, this may require consideration under the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR).
Where does the visible dust go when your current machine starts? Does it travel past the operator before being captured? Are there areas where settled dust builds up, despite extraction being switched on? Does performance change as filters become loaded?
Review whether your extraction captures dust at source, maintains effective airflow throughout operation and suits the materials and processes involved. Identifying any gaps can help you determine where improvements may be needed.
AirBench Ltd are the UK’s leading manufacturer of downdraught benches and cross draught extraction systems. We have more than 10,000 extraction systems in service in the UK and overseas. Along with our range of coolant mist filters and air cleaning systems, we are actively helping businesses across many industries solve their workplace dust and fume issues.
If you'd like to try an AirBench product for FREE simply book a demo and we'll bring one to you.
If you’d like to try an AirBench product for FREE simply book a demo and we’ll bring one to you.